PDWDF directional solenoid valve

Category:

Directional Solenoid Valve

This type of two-way solenoid valve is a direct acting, cone valve structure. When this valve is powered off, port 1 and port 2 are connected and port 3 is closed. When powered on, port 2 and port 3 are connected and port 1 is closed. All channels can flow in both directions. Due to its conical valve structure, this valve has extremely low leakage.

Product advantages

The fatigue strength of the electromagnetic sleeve component reaches 350 bar; This valve can be directly driven and does not require minimum hydraulic operating pressure; This valve is suitable for load locking applications at port 3. In the event of a power source failure, the valve will close under spring bias. The cartridge valve with EPDM sealing ring can be used in phosphate hydraulic oil systems. Exposure to petroleum based hydraulic oil or lubricating grease can damage the sealing ring; All configurations of this type of valve are equipped with zinc nickel coating, which can provide 1000 hours of salt spray protection; The valve has a manual control option; The valve exhibits an extremely low leakage rate; Less than 10 drops per minute; Utilize floating structures to reduce the possibility of internal component bonding caused by excessive installation torque or machining errors in socket/cartridge valves.

400-0532-090

sales@paguld.com

Online Consultation

Contact

产品介绍

Product Overview

Technical Parameter

Maximum operating pressure	350bar
Flow capacity	30L/min
Maximum leakage	5 drops/min
Hexagonal size for valve head installation	22,2mm
Valve installation torque	41-47Nm
Rated response time	50ms
Socket	T-11A

Keywords:

Online Consultation

Product name:

Submit

%{tishi_zhanwei}%