PDTDF directional solenoid valve

Category:

Directional Solenoid Valve

This type of two position two-way solenoid valve is a direct acting, cone valve structure. This valve has two configurations: normally open and normally closed. Due to its conical valve structure, this valve has extremely low leakage.

Product advantages

The fatigue strength of the electromagnetic sleeve component reaches 350 bar; This valve can be directly driven and does not require minimum hydraulic operating pressure; When using a normally closed valve spool, this valve is suitable for load locking applications. In the event of power failure, the valve will return to the closed position; The cartridge valve with EPDM sealing ring can be used in phosphate hydraulic oil systems. Exposure to petroleum based hydraulic oil or lubricating grease can damage the sealing ring; All configurations of this type of valve are equipped with zinc nickel coating, which can provide 1000 hours of salt spray protection; The valve has a manual control option; The valve exhibits an extremely low leakage rate; Less than 10 drops per minute; Utilize floating structures to reduce the possibility of internal component bonding caused by excessive installation torque or machining errors in socket/plug valves.

400-0532-090

sales@paguld.com

Online Consultation

Contact

产品介绍

Product Overview

Technical Parameter

Maximum operating pressure	350bar
Flow capacity	40L/min
Maximum leakage	5 drops/min
Hexagonal size for valve head installation	22,2mm
Valve installation torque	41-47Nm
Rated response time	50ms
Weight	0.25kg
Socket	T-13A

Keywords:

Online Consultation

Product name:

Submit

%{tishi_zhanwei}%